A transom for an interior door is simply a decorative glass or wood panel over the top of an interior door.  For example, a glass transom may be 1lite (with one piece of glass), or possibly a 3 lite (glass with three sections), over the top of your door.  Glass can be clear glass, or [...]

InteriorDoors.Com has its’ own line of Solid Hardwood V-Groove Interior Doors. These doors are be available in our 1 3/8” interior doors in our square stile and rail Kinsman Style [...]

Did you know that we have custom door size options available.  This is one of the specialties of InteriorDoors.com .  All of our doors, whether they are raised panel, flat panel, glass french doors, v-groove doors, or any of our bifold door selections, have this option.
This option is available on both our 1  3/8″ inch [...]

Designer Doors is located in Burghill, Ohio a small, mostly farming community, situated in the northeast part of the state. Our 28,000 square foot facility is twelve miles north of interstate 80, twenty miles north of Youngstown, Ohio, which is considered to be the midway point between Cleveland and Pittsburgh, and centrally located to [...]

(A)   We have 3 ways
   1. Call Toll Free 1-800-772-0314 M - F 8 am - 4:30 pm EST   2. Email us at marketing@interiordoors.com   3. Submit to our Quote Form.  

(A)   We only use hardwoods that are native to our region, except Mahogany, which grows in a tropical climate. We manufacture our doors in the following hardwood species; Poplar, Ash, Red Oak, White Oak, Hickory,Maple, Cherry, Mahogany, and Walnut.  Corner Section Samples

(A) Please click on the Wood Types to read up on the different between hardwoods and softwoods types.
Powered by ScribeFire.
Technorati Tags: doors , door hardware , commercial door hardware , door accessories , pocket doors , bi-fold doors , by-pass doors , accordion doors , interior doors , exteriior doors , [...]

Main Attributes of Doors Manufactured
by Designer Doors, Inc.

[...]

(A)    Our method of construction allows the door height to be trimmed down no more than 1” from the bottom rail and ½” from the top rail for a total cut down allowance of no more than 1 ½”. The door width can be trimmed ¼” on each side for a total of no more [...]

(A)    All of our doors are manufactured in heights of 6/8 (80”), 7/0 (84”), and 8/0 (96”) with widths [...]